| High-Speed Ethernet Communication for PLCs |
|
|
| Dec 01 2006 | |
|
AutomationDirect (Cumming, GA) has released the H4-ECOM100 Ethernet communication module for the DirectLOGIC DL405 PLC. The H4-ECOM100 can be inserted into any I/O slot of any local DL405 base, including expansion bases when using the DL450 CPU and -1 bases to implement master/slave Ethernet communication at 10 or 100 Mbit data rates. The module supports the industry-standard MODBUS TCP/IP Client/Server protocol, and IP and IPX protocols. This allows a DL405 PLC with an H4-ECOM100 module to serve as a client (master) or as a server (slave) on a MODBUS TCP/IP Ethernet network. ![]() The H4-ECOM100 can be configured to serve as an e-mail client to send specified messages to e-mail addresses. The module ships with NetEdit3 software to configure ECOM modules for networking. NetEdit3 can be used to adjust parameters for PLC-to-PLC communications and to display all identifiers and troubleshooting information for each module on the network. For Free Info Visit http://info.hotims.com/10958-407 |







